底盘类 - 杭州萧山宏泰五金工具厂-官网

产品中心

底盘球头拆装适配器组套

• Includes all the receiving tubes and removing/installing adapters needed to work on most GM, Ford and Dodge 2-wheel and 4-wheel drive pick-ups, vans and sport utility vehicles through 1997.• Work on press-fit upper and lower ball joints.• Set also inclu

3件套球头维修组套

• Install and remove 4-wheel drive press-fit parts such as ball joints, universal joints and truck brake anchor pins with this 3 piece set. An extension of the Ball Joint Service Tool Set. • Adaptors allow service for 1967 through

10件套球头维修组套

• This heavy duty tool set is excellent for removal and installation of press-fit parts such as ball joints, universal joint and truck brake anchor pins.• It will remove even rusted and corroded parts.• Set contains C-frame press, 3 receiver tubes sizes:

7件套球头维修组套

• Removing & Installation for 2WD and 4WD Vehicles.• Press-Fit Parts: Ball Joints, Universal Joints & Truck Break Anchor Pins.• 1 PC C-frame press.• 3 PC receiver tubes: 2-3/4" I.D. x 3" O.D.; 2-1/4" I.D. x 2-1/2" O.D.; 1-3/4&q

斜型培令拆装器

• Universal and fully adjustable bearing, race, and seal driver all in one.• No fumbling with fixed-sized pucks.• Fits 18.5 - 89mm (0.72" to 3.5").• Press 40mm (1.5") deep.• Durable tempered aluminum alloy.• Lock bolt holds jaws dimension.•

轮毂夹具扩展套件

• For servicing struts, ball joints, or steering knuckles with pinch bolt mounts.• Remove most stubborn struts and ball joints with ease.ﾠ• This separator mounts in the pinch bolt holes and drives the anvil into the pinch slot, expanding the mount for eas

轮廓拆装工具组套

The Hub Grappler Kit is the complete solution for servicing wheel hubs and bearings on the vehicle without removing the steering components or knuckle. This eliminates unnecessary alignments or the use of a shop press, cutting service time dramatically.•

14PC重型汽车齿轮和轴承拉出装置

• Pulls gears from 9/32" to 3" in diameter.• Constructed from hardened heat-treated steel for durability.• Bolts for Bearing Separators with Nuts and Washers 5.5 inch - M12 Thread.• 6 inch Pawls 3/8 inch -M16 Thread with Nuts.• 6.75 inch Connect

轴承分离器

• Bearing separator spread range: 10-30mm.• Bolt (1/4"-20T x L83mm).• Bearing separator spread range: 30-50mm.• Bolt (3/8"-24T x L120mm).• Bearing separator spread range: 50-75mm.• Bolt (1/2"-20T x L135mm).

后轴轴承拉出器维修组套

• Allows for easy removal of semi-floating rear axle bearings.• Standard SAE sizes, set works on most domestic/American cars.• Washer captures the bearing firmly, distributing the applied force over the entire bearing and preventing damage.• Includes blow

主前轮驱动轴承适配器组套

• Includes heavy duty grade 7/8” D (1.25" Hex) Grade 8 drive bolt for twice the durability of the industry standard.• Replace wheel bearings without the need for alignment after by keeping the strut assembly and steering knuckle in place during servi

培令和密封驱动拆装器轴承组套

• Makes it easier to insert wheel bearing race and seals without damage to race and axle housing.• Set includes nine discs sizes to fit most standard wheel bearingsTurn discs over to drive seals.• Set includes the following parts: No. 1 - Size

«
1
2
3
4
5
6
»