产品中心

产品详情
拉玛
• Drop forged yoke is plated to resist corrosion.• Remove timing gears and other gears with tapped holes.• Heat treated center screw.• Size: includes two 5/16 inch by 4 inch bolts.
产品详情
6" 2爪拉码
• For light-duty pull jobs including battery cables, wind-shield wiper arms, banjo bolts, pulleys, seals, etc.• "L" shaped jaws, pivoting center screw.• 6" spread, 4" reach, Zinc plated to  prevent corrosio.
产品详情
4" 2爪拉码
• For light-duty pull jobs including battery cables, wind-shield wiper arms, banjo bolts, pulleys, seals, etc.• "L" shaped jaws, pivoting center screw.• 4" spread, 3"reach, Zinc plated to prevent corrosio.
产品详情
3PC软管修剪钳
• Seals flexible brake lines, fuel and vacuum lines, heater and radiator hoses.• Smooth rounded edges to insure no damage to the internal hose reinforcement.• Locking feature allows hands free use.• Bright high-visibility color.• Fibre reinforced insutria
产品详情
软管修剪钳
• Shuts off flow through vacuum lines, fuel lines, coolant lines, etc.• Cocking ratchet mechanism holds pivoting jaws tightly in place.• Heavy duty swivel jaws pivot to assure parallel pinching.• 3-IN-1 SET: a small 8-inch (20.3cm) long tool with a 1.5-in
产品详情
锁环钳
• Jaws are scored on the outside for secure gripping.• Drop forged alloy steel for strength and durability.• Spring loaded jaws with Vinyl Grip Handle for comfort.• Used to spread snap rings found on brakes, pedal shafts, clutch shafts, transmissions, mac
产品详情
修剪钳
• Removing trim clips without breaking them is a challenge with ordinary pliers especially in tight areas• Allowing the access to remove the trim clip as well as saving the cost of replacing the broken trim clip• It works on trim pad hood insulation etc
产品详情
连接钳
• Pliers for removing electrical relays on most domestic and import vehicles.• Offset handle and thin tips allow access to relays in confined areas.• Also works on many heavy-duty and industrial applications.• This allows relay to pop free from socket wit
产品详情
软性软管夹钳
• Allows for removal of plastic and/or metal self-tightening hose clamps with diameters of 11/16" - 2-1/2" (18mm - 54mm)• Precision clamp on end of flexible cable allows for extended reach where other models cannot reach• Pliers can be locked, f
产品详情
图钉拆卸钳
• Specifically designed for the removal of push pins with center locking pin. • Quickly removes plastic anchors that have center pins without damage to pins or anchor. • Tool lifts the center pin and pulls anchor in one simple step.• Anchors com
产品详情
图钉移除钳
• 80-Degree Angled Pliers for Retainer & Anchor Removal – Honda, Toyota, GM, Ford, Chrysler to quickly and easily remove plastic anchors that have center pins without damaging the pins or the anchor; Specially designed to remove push pins with center
产品详情
车门把手钳
• For removing most windshield molding clips and door handle clip.• Slips under door handle without damage to panel material.