产品中心

产品详情
油罐连接工具组套
• Tools included service many types of quick disconnect fittings used on General Motors, Ford and Chrysler vehicles.• Tools service heater hoses, transmission oil coolers, air conditioning and fuel lines.• Vehicle manufacturer approved and will not damage
产品详情
15PC油管安装工具组套
Fuel & Transmission Line Disconnect Set:• Anodized aluminum.• Separate fittings on fuel lines, fuel filters & fuel tank return lines• Sizes: 1/4"", 5/16"", 3/8"" & 1/2"" Oil Cooler Line Disconnect Tool.•
产品详情
8PC油管连接器组套
• Anodized aluminum.• Separate fittings on fuel lines, fuel filters & fuel tank return lines.• Sizes: 1/4", 5/16", 3/8" & 1/2" Oil Cooler Line Disconnect Tool.• Separates automatic transmission oil cooler lines on Ford Taurus a
产品详情
燃油管路快速断开工具
Use to release the fuel line locking mechanism on 1989 and newer GM, 1990 and newer Ford and some 1990 and newer Mazda vehicles.Also fits Chrysler fuel-injected vehicles (except imports).• Fits 5/16" and 3/8" fuel lines.
产品详情
福特空调和燃油管路弹簧锁连接工具
Use to release spring lock couplings on fuel and air conditioning lines on most Ford and Chrysler LH series vehicles.• 4 size: A (7/8"), B (3/4"), C (5/8"), D (1/2").
产品详情
塑胶件接头
The engagement lip should be approximately the same diameter as the spring or open side of fuel line fitting.• Twist tool to open and slip over fuel line fitting.• A "click" may be heard as fuel line fitting release.• Separate fuel lin
产品详情
9PC弹簧锁连接工具
• Includes spring locking tool:3/8" RED,1/2" BLUE,5/8" BLACK,3/4" WHITE.• Fuel disconnect tool:3/8" YELLOW,1/2" GREEN.• Fuel line fitting disconnect tool:5/16" GREY,3/8" CYAN FORD/GM quick disconnect• Tool:1/2"
产品详情
冷气油管快速接头工具
• Safely separates fuel lines, transmission lines, and oil lines.• Designed for use with OEM Ford fittings.• Color-coded for quick reference.• Includes 1/4 in., 5/16 in., and 3/8 in. tools.• Cast and machined aluminum with anodized finish.
产品详情
冷气油管快速接头工具
• Quickly, easily and safely separate fuel lines, transmission lines and oil lines.    • Anodized aluminum finish resists corrosion.         • Suitable for most Ford Vehicles.
产品详情
GM车型车门把手取出器
• This is a versatile tool for disconnecting clutch lines when you're working on clutch assemblies or slave and master cylinders.• The bent end works on 1996 to 2004 full-size 2WD and 4WD trucks Chevrolet S-10 Blazer and pickups.• The straight end is
产品详情
离合器连接工具
• Reaches and disconnects the hydraulic clutch line from the clutch slave cylinder without damage to the coupling or clutch line.• Fits Ford Hydraulic clutches:1988 and later model Ford F series trucks, Bronco ll's, Rangers and Explorers; 1989 and lat
产品详情
快速接头拆卸工具
• Easily separates quickly disconnect style fittings on the following:   Ford: EFI fuel lines with hair pin connectors.   Transmission cooler lines on the following: 1987 to Current – Buick Riviera & Reatta, Cadillac Concours, Eldo