产品中心

产品详情
燃油泵固定扳手
• For proper removal or secure lock down of the fuel pump retaining ring.• Reduces the chance of damaging fuel tank, fuel pump or retaining ring.• Offset coated handle for sure grip and easy use.• Heavy duty construction.
产品详情
Low Profile Offset Oxygen Sensor Socket
3/8" Dr. x 7/8" (22mm) x 30mm
产品详情
Heated Oxygen Sensor Socket
1/2" Dr. x 7/8" (22mm) x 50mm
产品详情
Oil Pressure Sending Unit Socket
3/8" Dr. 1" & 1-1/16" (27mm) x 74mm
产品详情
Vacuum Switch Socket
3/8" Dr. x 7/8" (22mm) x 80mm
产品详情
Injector Socket
1/2" Dr. x 1-1/16" (27mm) x 85mm
产品详情
Oxygen Sensor Socket
3/8" Dr. x 7/8" (22mm) x 90mm
产品详情
Oil Pressure Sending Unit Socket
1/2"Dr. x 29x90mm
产品详情
7PC氧化传感器扳手组套
• 1" & 1-1/16" Oil Pressure Sending Unit Socket Includes a 1" and 1-1/16" hex which allows the removal of oil pressure sending units. Special deep design fits switches up to 2-5/8". Designed to be used with a 3/8" drive t
产品详情
含氧感应套筒
• Size: 7/8” (22mm) 6PT.• Use Wrench Drive: Hex 21mm.• Square Drive: 1/2"DR.• Special slot in the side of socket for sensor wire clearance.• Provides adequate depth to fit over sensor.• For oxygen sensor on Japanese cars Ford, GM, Chrysler & othe
产品详情
3PC含氧感应套筒工具
• Vacuum switch socket designed to remove and install oxygen sensors in most domestic and many imported vehicles with a slot that allows clearance of wire; to be used with 3/8" drive tool or 1" wrench.• Heated oxygen sensor socket designed with
产品详情
含氧感应器套筒
• Removes and installs oxygen sensors on vehicles with computer controlled engines.• Common 6 point, 7/8 in. (22mm) socket fits most oxygen sensors.• Offset drive with wire gate accesses sensor from the side, not the top, preventing damage to wires.• Use